Designed for removing damaged or difficult glow plugs from the cylinder head.
For removing broken or damaged glow plugs.
Removes 8mm and 10mm glow plugs.
01. Hex 12mm Spindle with Hex 30mm Nut and Cone Centre Tool
02. Drill Installer
03. 1/4" - 28 UNF Hex 8mm x2pc
04. 6mm Diameter Tube x2pc
05. 3mm Allen Key
06. 9.7mm Square Socket
07. 7 X 5.5 mm Drill Bit
08. 9 X 5.5 mm Drill Bit
09. T Handle
10. 2 X 3.5 mm Drill Bits
11. M10 x P10
12. M8 x 1.0
13. 1/4" - 28 UNF
Instructions:
Choose the No.6 socket, install it onto the glow plug, use a hammer to fix the socket with glow plug head, and then try to remove the glow plug with 3/8" DR spanner. This tool is especially for the situation when removing the glow plug, but if only the head is removed, then please use the other accessories to remove the rest of the glow plug from glow plug hole and replace with a new one.
Insert No.4 tube into the glow plug hole, then insert a drill into No.4 tube then drill a hole with air tool.
Separate the No.1 device and only choose the cone centre tool and install it into the glow plug hole. Choose suitable drill No.7 or 8 (7x5.5 or 9x5.5), insert the drill into No.2 drill installer. lt is important to use No.5 (3mm alley key) to lock the screw on drill installer.